2255B Queen St. East Suite 512 | Toronto, ON
See our other Indoor Air Quality Web Sites: MouldInspection.com SafeAir.ca


The Staggering Cost Of Fixing Mold Issues In Your Home

Have you just discovered mold in your home but are concerned about removal costs? Here’s what to expect.

Mold is an unexpected issue, and most frequently, an unanticipated hit on your finances. When you identify a serious problem, you’re likely to deal with it in a prompt and professional manner.

In this case, remediation cost is perhaps the first thing that comes to your mind once you identify infestation in your home.

Bear in mind that cost varies across contractors, and while this process can be expensive, it’s best you handle it sooner rather than later. Here’s a look at the various factors that determine the cost of fixing mold problems.

Costs Involved in Mold Removal

Labor Costs

If the infestation covers 100 sq ft or less in total area, you can generally tackle the project yourself. However, you should engage professional services for bigger areas.

Furthermore, if you discover the fungi in different areas of the home, mold specialists should handle the cleanup.

It’s important to note that labor costs can constitute a huge part of the total cost of remediation. This is because skilled removal companies use expensive equipment and skilled labor. For instance, high Efficiency Particulate Air (HEPA) vacuum is an expensive piece of machinery that uses powerful suction and special filters to eliminate mold from materials.

You’ll also discover that workers operating this machine must wear face masks, mold-proof suits, and must possess special training.

Materials Cost

These costs differ widely from one project to the next. In some instances, mold may have destroyed lumber, floorboards, and sheet rock.

In other instances, you may find it only in small areas of ceilings, walls, or in the carpet. Therefore, costs may range between a few hundred dollars to thousands, for instance if you’re dealing with a flooded basement.

Factors that Determine Mold Removal Costs

  • Size of Infestation

This factor will determine the costs you should expect. Small and localized infestations typically need fewer resources and less time, resulting in lower costs. However, you must exercise caution if you choose this route.

Although you might only notice a small infestation, it could signify the existence of spores in different parts of the building. If the building is over 10 years old, you should consider mold testing.

  • Location

A good specialist will possess techniques to detect mold and discover where it’s concentrated the most. If removal is to take place in less accessible spots, for instance HVAC system, crawl spaces, and air ducts then remediation cost is likely to be high.

Make sure you hold an honest conversation with the specialist concerning the tricky areas. This will allow you to identify the type of work needed to reach them. Moreover, you’ll also know how they’ll influence your bottom line.

  • Experience Level

You might come across a good deal while performing research on removal specialists. Consequently, the less expensive route might offer lower costs than more established companies might.

While it’s tempting to choose this route, bear in mind that quality work is more cost-effective in the long-term.

If the problem source remains untreated and undiscovered because of poor methodology or inexperience, you’ll have to deal with repeat visits, higher costs, and mounting frustrations.

Importance of Mold Prevention

Health Risks

Mold can affect people in different ways. For instance, you might exhibit allergy-like symptoms such as sneezing and skin irritation due to exposure. In other instances, the symptoms can be more severe, resulting in symptoms such as neurotoxicity.

Structural Components and Building Materials

The fungus may cause structural damage to your home since it breaks down and feeds on organic matter. Therefore, if you discover infestation on paper backing, walls or carpeting, you must remove the materials.

Personal Property

Besides structural damage, the fungus may cause property destruction in your home. When mold affects personal property, it may be impossible or difficult to clean. Often, you’ll have to destroy the item because you can’t remove the spores fully.

If you’re experiencing mold issues in your home, don’t put it off because you’re concerned about the associated costs. Bear in mind that most strains develop and spread fast and delay is likely to worsen the issue. Additionally, you’ll probably spend more in the end, so act fast.

If you need mold assistance, please contact us to discuss a solution: (416) 414-5690

This entry was posted in Mold Facts, Mold Inspection and tagged . Bookmark the permalink.

4936 Yonge Street, Suite 240
Toronto, ON

TEL. (416) 414-5690

See our other Indoor Air Quality Web Sites:

Recent Post

Mold and Health Posted on April 27, 2016

Mold infestations within homes are a big concern and pose many potentially hazardous health issues. There are many mold and health related problems that could avoided by taking proactive measures and ensure that you and your loved ones are kept … Continue reading

Read More