Does your home constantly have a musty odor during hot and humid weather? Here’s why.
Mold is a common term for any fungus that develops on damp construction materials or food. It frequently appears as a stain and comes in various colors.
It’s important to note that temperature affects mold development. Varied mold types have minimum maximum and minimum temperature ranges for development. If you’re curious about the link between weather and mold growth, check this out.
Hot weather and Mold
Mold flourishes at temperatures between 77 and 860 F. Therefore, hot weather promotes mold growth. Although air conditioning will decrease your home’s interior temperature, the temperature may not be evenly low enough to impede mold growth.
It’s imperative you pay special attention to areas inside closets and cabinets, which are frequently warmer than the rest of your home. You’ll discover that humidity will be trapped in such areas unless there’s a way for air to circulate out and in.
How to Prevent Mold During Hot Weather
During hot months, mold can be problematic. Nevertheless, taking the necessary steps to prevent infestation will prove beneficial. These tips will help prevent mold development during hot conditions.
- Maintaining Cleanliness
Maintaining a clean home is necessary for various reasons. Moisture is a major condition for mold to thrive, so development can occur on various surfaces within your home.
Nevertheless, regular cleaning can be helpful in preventing mold growth. Bear in mind that sources of growth include dirt and things such as soap scum. Ensure you eradicate these elements from your home through regular cleaning.
- Humidity Control
Mold requires water to thrive, so humidity in your home can be detrimental. This can particularly be problematic throughout summer months when atmospheric humidity is especially high.
Whether the humidity is originating from external air or daily activities such as showering or coking, it’s important you decrease the amount that remains in your home.
Ensure you wipe away excess moisture on the ceiling and walls while ensuring the proper functioning of bathroom and kitchen fans to eliminate the moisture. For people residing in particularly humid areas, it may be necessary to invest in a dehumidifier.
- Maintain Air Circulation
Stagnant air is a potential source of mold growth. However, maintaining air circulation throughout the home will help prevent growth. There are various ways to promote air circulation such as keeping your home’s vents open even if you rarely use the room.
Humid Weather and Mold
High levels of humidity can frequently be a source or contributing factor of mold development. Excess humidity could result in mold proliferation, particularly throughout wet seasons. If the weather has been extremely humid for a couple of days, you might detect mold growth in your home.
During rainy weather, it’s common for mold to develop on benches, walls, and other surfaces. If you reside where atmospheric humidity is naturally high, for instance by the coast, mold growth can be a recurring issue.
Moreover, when moisture in your home evaporates into the air, it leads to an increase in indoor humidity. Bear in mind that if your home lacks proper ventilation, humidity will remain high for an extended period.
For this reason, it’s important you decrease humidity levels to keep the fungus at bay. You can adopt any of these tips to achieve low humidity levels.
Ensure there’s ventilation especially in areas that produce moisture such as the bathroom and kitchen. Ensure you also turn vent fans on especially in areas that are highly vulnerable to mold growth.
In some situations, excessive humidity can be challenging. For instance, if you reside in a multifamily complex such as an apartment building some factors may be beyond your control. In this case, a dehumidifier will help decrease the moisture in your dwelling by drawing some atmospheric water.
If you constantly experience mold problems during hot and humid weather, these measures will help you deal with the recurring problem.
If you need mold assistance, kindly contact us for a solution (416) 414-5690