2255B Queen St. East Suite 512 | Toronto, ON
See our other Indoor Air Quality Web Sites: MouldInspection.com SafeAir.ca


Are Your Toilets Slowly Leaking And Causing Potential Issues?

Are you aware that a silent toilet leak potentially wastes between 50 and 500 water gallons daily, resulting in increased water bills? Here’s what you need to know about toilet leaks.

Leaks from plumbing fixtures, pipes, and fittings are a major source of water waste for numerous households.

While some leaks are apparent, such as leaking water heaters and dripping faucets, numerous leaks remain undetected because of an invisible source.

In addition to being inevitable, annoying, and at times costly, leaky toilets can generate high water bills. Consequently, it’s important you understand these facts on leaky toilets and the resulting issues.

Sources of Leaking Toilets

  • Leaky Supply Line

A defective supply line will frequently cause your toilet to leak. When the joints in your supply line wear out or become loose, they permit water seepage.

Furthermore, the rubber lining that guard against leakage may rupture or wear out. Mechanical damage of the supply line is another source of leakage.

  • Corrosion

Corrosion can occur at any section in the toilet assembly or pipes and can arise from water impurities, age, chemical reactions or a mixture of the three.

Corrosion is perhaps the most physically destructive thing that can affect your pipes and plumbing fixtures, since it usually originates from within them.

  • Warped Flapper

Leakage arising from a warped flapper can be hard to spot and consequently develops a silent leak. Over time, the flapper will wear out, especially due to mineral accumulation on the flapper. This is because water authorities continuously add chemicals to water for purification purposes.

The cleaners you use in the toilet tank further increase chemicals in the water, causing the flapper to wear away gradually. In this case, water loss will vary depending on the degree to which the flapper wears out.

  • Improper Functioning of the Float

The float assembly in the tank is typically a huge plastic ball joined to a lengthy metal rod that floats in your toilet’s tank. When the float assembly stops functioning, the toilet runs incessantly and may flood.

  • Faulty Connections

The different toilet connections typically loosen over time. Rubber linings that ensure watertight connections also show signs of wearing out, causing leakage.

It’s best you substitute any damaged or worn out parts to avoid leakage. It’s also advisable you examine your toilet connections occasionally to ensure they’re in good condition.

  • Cracked tank

The tank is a huge container that allows water flow into the bowl whenever you flush your toilet. An accidental impact on this part may cause a crack, which will result in perpetual leaking.

The toilet valve will continue replenishing water as usual irrespective of the broken tank, causing continuous leakage through the fractured tank. At times, the crack may be invisible, making it harder to spot.

Effects of Leaking Toilets

Ignoring toilet leaks can have major consequences, including:

  • Water Bills

Leaks can cost you hundreds of dollars annually. A slow leak can waste an additional 450 gallons monthly, which is equal to approximately $5 extra per month.

A steady leak on the other hand, can waste an additional 750 gallons monthly, equaling approximately $10 extra monthly. Steadier leaks lead to more money and water wastage. Nevertheless, if you take care of the leak as soon as possible, you could save considerable money.

  • Mold

Whenever moisture or water is present, mold is always a possibility. Although it may be invisible, it doesn’t mean the fungus isn’t affecting your health and that of other building occupants.

Some of the symptoms experienced due to mold infestation include sore throat, sinus congestion, nosebleeds, chest tightness, and difficulty breathing.

You can protect your employees and tenants by fixing the leaks and dealing with the affected area immediately.

  • Property Damage

Water damage can affect your property’s structural integrity besides leading to mold development. From cracking walls to warped floors, it can cost you considerable money to repair the damage. If you wish to avoid costly repairs, ensure you repair leaky toilets immediately.

Is your bathroom constantly flooded despite a thorough cleanup? Perhaps it’s time you considered your toilet as a possible cause.

If you need mold assistance, please contact us to discuss a solution: (416) 414-5690

This entry was posted in Water Damage Inspection. Bookmark the permalink.

4936 Yonge Street, Suite 240
Toronto, ON

TEL. (416) 414-5690

See our other Indoor Air Quality Web Sites:

Recent Post

Mold and Health Posted on April 27, 2016

Mold infestations within homes are a big concern and pose many potentially hazardous health issues. There are many mold and health related problems that could avoided by taking proactive measures and ensure that you and your loved ones are kept … Continue reading

Read More